Chiller Specs:
- 3/4HP High Efficiency Chiller
- 7,500 BTU/hr
- 56 dBA (fairly quiet)
- 110 – 120 Volts / 450 Watts / 3.9 Amps
- 17”W x 15”D x 13”H
- 49 Pounds
- Built in Pump
- 10' power cord with GFCI protection
- Rain Proof* (*disconnect chiller and drain completely when ambient temps are freezing or below to prevent damage to chiller)
- 1 Year Product Warranty
- Proudly made in the USA
Description:
Whether you are new to cold therapy or a seasoned pro, you are likely doing it for the benefits that exposure to cold offers rather than the physical workout you’ll get from lugging all the ice needed to keep up with it. Lets face it – keeping up with the amount of ice needed to keep a ice bath cold can get to be quite the burden. Our chiller will keep your ice bath cold effortlessly, this should lead to more consistent and frequent usage. Make the most out of your ice bath by turning it into an iceless bath!
The chiller can reach into the low 40F’s, even down into high 30F’s with the right conditions. Ambient temps and sun exposure account for the majority of the heat load on a cold therapy tub (your body heat is insignificant compared to the sun). Reducing the external heat load will improve chiller performance. Low to mid 40F’s should be possible on a most +/-100 gallons setup even in full sun / less than ideal conditions. Our cold therapy chillers can be used indoors and outdoors, except in freezing conditions
Cost to Run (lower than most expect):
At $0.12/KWh the monthly cost of operation should be around $18-$28/month. The compressor and fan only turn on when cooling is needed, once the water reaches your set point they turn off and only the low wattage pump continues to run.
A common question we get revolves around setting the chiller up on a timer. Ideally you’ll want to keep the water cold at all times. There’s a few reasons for this –
Cold water keeps bacteria (slimy walls) largely under control by slowing or stopping their growth. This significantly reduces the amount of maintenance needed to keep your water clean for longer periods of time. This means less frequent water changes and that much lower levels of sanitizer being an effective doses (chlorine/hydrogen peroxide/etc).
If you are using it on a regular basis the amount of potential power savings will be fairly insignificant, the heat it would gain in the “off” period still needs to be removed when you turn it back on. So if running is normally cost $18-$28/month you might be able to save $3-$5/month. However have to change water and the filter more often so it is unlikely to be a net cost savings.
When you cut power to the chiller you also cut power to the pump. Pumps get the most wear and tear during startup, that’s when a pump is most likely to fail as well. Cycling the power to the chiller is just adding unnecessary wear and tear to the pump.
*Please note your setup needs to gravity prime to the pump, the pump is not capable of self priming/suction. Place the chiller within 3' of the drain of your tub, the bottom of the chiller should be at the same or lower height compared to the bottom of your tub – do not elevate the chiller above the tub. An overly long tubing run from the tub drain to the chiller inlet may cause the pump to fail to move enough water.
At The Recovery Depot, we understand the importance of easy access to the products that enhance your well-being and aid in your journey to recovery. That's why we're excited to offer FREE SHIPPING on MOST order, so you can focus on your health without worrying about extra costs.
Take a seat and unwind while your order progresses to its destination within an approximate timeframe of 4-7 days.
To gain a clear insight into what you can anticipate after placing your order with Prime Selection, please peruse the following guidelines:
Order Confirmation:
Upon completing your order, you will promptly receive an email confirming your order. This email serves as confirmation that we have successfully approved your credit/debit card for the purchase and are in the process of preparing your selected item(s).
Once your order is received, we initiate immediate contact with our warehouse to commence the fulfillment process and prepare your item(s) for shipment.
Order Shipment:
Within 24 hours of your item(s) being dispatched, you will receive an email confirming the shipment. This email will also include the tracking information for your order, providing you with added convenience.
Please note that shipping times may vary due to specific factors, but we want to assure you that we are dedicated to keeping you well-informed throughout the process.
We acknowledge that there may be times when you wish to postpone your delivery to a later date, and we are here to accommodate your needs. Please feel free to reach out to us, and we will make the necessary arrangements. At The Recovery Depot, your convenience and satisfaction are our top priorities.
We get it. You’ve got a lot of choices when it comes to online retailers. Here's why we think you should shop with us at The Recovery Depot.
Chiller Specs:
- 3/4HP High Efficiency Chiller
- 7,500 BTU/hr
- 56 dBA (fairly quiet)
- 110 – 120 Volts / 450 Watts / 3.9 Amps
- 17”W x 15”D x 13”H
- 49 Pounds
- Built in Pump
- 10' power cord with GFCI protection
- Rain Proof* (*disconnect chiller and drain completely when ambient temps are freezing or below to prevent damage to chiller)
- 1 Year Product Warranty
- Proudly made in the USA
Description:
Whether you are new to cold therapy or a seasoned pro, you are likely doing it for the benefits that exposure to cold offers rather than the physical workout you’ll get from lugging all the ice needed to keep up with it. Lets face it – keeping up with the amount of ice needed to keep a ice bath cold can get to be quite the burden. Our chiller will keep your ice bath cold effortlessly, this should lead to more consistent and frequent usage. Make the most out of your ice bath by turning it into an iceless bath!
The chiller can reach into the low 40F’s, even down into high 30F’s with the right conditions. Ambient temps and sun exposure account for the majority of the heat load on a cold therapy tub (your body heat is insignificant compared to the sun). Reducing the external heat load will improve chiller performance. Low to mid 40F’s should be possible on a most +/-100 gallons setup even in full sun / less than ideal conditions. Our cold therapy chillers can be used indoors and outdoors, except in freezing conditions
Cost to Run (lower than most expect):
At $0.12/KWh the monthly cost of operation should be around $18-$28/month. The compressor and fan only turn on when cooling is needed, once the water reaches your set point they turn off and only the low wattage pump continues to run.
A common question we get revolves around setting the chiller up on a timer. Ideally you’ll want to keep the water cold at all times. There’s a few reasons for this –
Cold water keeps bacteria (slimy walls) largely under control by slowing or stopping their growth. This significantly reduces the amount of maintenance needed to keep your water clean for longer periods of time. This means less frequent water changes and that much lower levels of sanitizer being an effective doses (chlorine/hydrogen peroxide/etc).
If you are using it on a regular basis the amount of potential power savings will be fairly insignificant, the heat it would gain in the “off” period still needs to be removed when you turn it back on. So if running is normally cost $18-$28/month you might be able to save $3-$5/month. However have to change water and the filter more often so it is unlikely to be a net cost savings.
When you cut power to the chiller you also cut power to the pump. Pumps get the most wear and tear during startup, that’s when a pump is most likely to fail as well. Cycling the power to the chiller is just adding unnecessary wear and tear to the pump.
*Please note your setup needs to gravity prime to the pump, the pump is not capable of self priming/suction. Place the chiller within 3' of the drain of your tub, the bottom of the chiller should be at the same or lower height compared to the bottom of your tub – do not elevate the chiller above the tub. An overly long tubing run from the tub drain to the chiller inlet may cause the pump to fail to move enough water.
At The Recovery Depot, we understand the importance of easy access to the products that enhance your well-being and aid in your journey to recovery. That's why we're excited to offer FREE SHIPPING on MOST order, so you can focus on your health without worrying about extra costs.
Take a seat and unwind while your order progresses to its destination within an approximate timeframe of 4-7 days.
To gain a clear insight into what you can anticipate after placing your order with Prime Selection, please peruse the following guidelines:
Order Confirmation:
Upon completing your order, you will promptly receive an email confirming your order. This email serves as confirmation that we have successfully approved your credit/debit card for the purchase and are in the process of preparing your selected item(s).
Once your order is received, we initiate immediate contact with our warehouse to commence the fulfillment process and prepare your item(s) for shipment.
Order Shipment:
Within 24 hours of your item(s) being dispatched, you will receive an email confirming the shipment. This email will also include the tracking information for your order, providing you with added convenience.
Please note that shipping times may vary due to specific factors, but we want to assure you that we are dedicated to keeping you well-informed throughout the process.
We acknowledge that there may be times when you wish to postpone your delivery to a later date, and we are here to accommodate your needs. Please feel free to reach out to us, and we will make the necessary arrangements. At The Recovery Depot, your convenience and satisfaction are our top priorities.
We get it. You’ve got a lot of choices when it comes to online retailers. Here's why we think you should shop with us at The Recovery Depot.
