![Amerec KT3 Digital Steam Shower Generator Control Kit, AK Series](http://therecoverydepot.com/cdn/shop/files/AmerecKT3KT3DigitalSteamShowerGeneratorControlKit_AKSeries_800x800.jpg?v=1702281179)
Sales@therecoverydepot.com
Mon-Fri 8am-6pm EST
The Amerec KT3 steam shower generator control kit works with Amerec AK series steam generators. A stylish update to Amerec's KT60 control, this digital control panel is backward compatible with the classic KT60.
Featuring a built-in temperature sensor, this control was designed for use inside the steam room. With the simple ease of 3-buttons, you control on/off, temperature, and time duration settings. The display alternates every 5 seconds between atmospheric room temperature and the remaining time of your steam session. Maximum session settings are up to 125 °F and 60 minutes (residential use). The K3 control kit includes a control cable and ComfortFlo steam head, which is available in a variety of designer finishes to match your fixtures.
For a temperature-controlled steam bath, Amerec AK-Series generators require either a KT3 with a built-in temperature sensor or a K3 with a separate temperature sensor. An Amerec K3 may be added to allow two controls for a steam bath, such as one inside the room and one outside, but if a KT3 is installed it must be inside the steam room. A maximum of two controls may be installed.
The temperature can be adjusted from 84 to 125 °F (29 to 52°C) with an initial default of 120 °F (49°C). The temperature display preference may be set using a jumper on the steamer circuit board to select either °F (default) or °C. The maximum bath time may be set to 60 minutes (default) or 24 hours (for light commercial use) using a jumper on the steamer circuit board.
This control must be mounted inside the steam room, approximately 4 feet up from the floor, as it contains the temperature sensor. A second K3 control may be installed outside the steam room for added convenince. Either control may be used to control the steam bath.
The low voltage controls can be mounted up to 25 feet from the steam generator. This control must be mounted inside the steam room so its built-in temperature sensor will function. String the 25-foot cable from the control location through 1/2” holes in the wall studs or ceiling joists to the generator.
KT3 Control
ComfortFlo Steamhead
KT3 Control
ComfortFlo Steamhead
Model | KT3 |
---|
KT3 Control | |
---|---|
Minimum Temperature Setting | 84°F |
Maximum Temperature Setting | 125 °F |
Minimum Session Timing | 5 minutes |
Maximum Session Timing | 60 minutes(Residential) 24 Hour(Light Commercial with jumper use) |
Installation | Wall-mount Inside Steam Room |
Width | 3" |
Depth | 0.5" |
Height | 3" |
ComfortFlo Steamhead | |
---|---|
Steam Head Connection | 1/2" NPT |
Width | 3" |
Depth | 1.4" |
Height | 2.75" |
At The Recovery Depot, we understand the importance of easy access to the products that enhance your well-being and aid in your journey to recovery. That's why we're excited to offer FREE SHIPPING on MOST order, so you can focus on your health without worrying about extra costs.
Take a seat and unwind while your order progresses to its destination within an approximate timeframe of 4-7 days.
To gain a clear insight into what you can anticipate after placing your order with Prime Selection, please peruse the following guidelines:
Order Confirmation:
Upon completing your order, you will promptly receive an email confirming your order. This email serves as confirmation that we have successfully approved your credit/debit card for the purchase and are in the process of preparing your selected item(s).
Once your order is received, we initiate immediate contact with our warehouse to commence the fulfillment process and prepare your item(s) for shipment.
Order Shipment:
Within 24 hours of your item(s) being dispatched, you will receive an email confirming the shipment. This email will also include the tracking information for your order, providing you with added convenience.
Please note that shipping times may vary due to specific factors, but we want to assure you that we are dedicated to keeping you well-informed throughout the process.
We acknowledge that there may be times when you wish to postpone your delivery to a later date, and we are here to accommodate your needs. Please feel free to reach out to us, and we will make the necessary arrangements. At The Recovery Depot, your convenience and satisfaction are our top priorities.
We get it. You’ve got a lot of choices when it comes to online retailers. Here's why we think you should shop with us at The Recovery Depot.
The Amerec KT3 steam shower generator control kit works with Amerec AK series steam generators. A stylish update to Amerec's KT60 control, this digital control panel is backward compatible with the classic KT60.
Featuring a built-in temperature sensor, this control was designed for use inside the steam room. With the simple ease of 3-buttons, you control on/off, temperature, and time duration settings. The display alternates every 5 seconds between atmospheric room temperature and the remaining time of your steam session. Maximum session settings are up to 125 °F and 60 minutes (residential use). The K3 control kit includes a control cable and ComfortFlo steam head, which is available in a variety of designer finishes to match your fixtures.
For a temperature-controlled steam bath, Amerec AK-Series generators require either a KT3 with a built-in temperature sensor or a K3 with a separate temperature sensor. An Amerec K3 may be added to allow two controls for a steam bath, such as one inside the room and one outside, but if a KT3 is installed it must be inside the steam room. A maximum of two controls may be installed.
The temperature can be adjusted from 84 to 125 °F (29 to 52°C) with an initial default of 120 °F (49°C). The temperature display preference may be set using a jumper on the steamer circuit board to select either °F (default) or °C. The maximum bath time may be set to 60 minutes (default) or 24 hours (for light commercial use) using a jumper on the steamer circuit board.
This control must be mounted inside the steam room, approximately 4 feet up from the floor, as it contains the temperature sensor. A second K3 control may be installed outside the steam room for added convenince. Either control may be used to control the steam bath.
The low voltage controls can be mounted up to 25 feet from the steam generator. This control must be mounted inside the steam room so its built-in temperature sensor will function. String the 25-foot cable from the control location through 1/2” holes in the wall studs or ceiling joists to the generator.
KT3 Control
ComfortFlo Steamhead
KT3 Control
ComfortFlo Steamhead
Model | KT3 |
---|
KT3 Control | |
---|---|
Minimum Temperature Setting | 84°F |
Maximum Temperature Setting | 125 °F |
Minimum Session Timing | 5 minutes |
Maximum Session Timing | 60 minutes(Residential) 24 Hour(Light Commercial with jumper use) |
Installation | Wall-mount Inside Steam Room |
Width | 3" |
Depth | 0.5" |
Height | 3" |
ComfortFlo Steamhead | |
---|---|
Steam Head Connection | 1/2" NPT |
Width | 3" |
Depth | 1.4" |
Height | 2.75" |
At The Recovery Depot, we understand the importance of easy access to the products that enhance your well-being and aid in your journey to recovery. That's why we're excited to offer FREE SHIPPING on MOST order, so you can focus on your health without worrying about extra costs.
Take a seat and unwind while your order progresses to its destination within an approximate timeframe of 4-7 days.
To gain a clear insight into what you can anticipate after placing your order with Prime Selection, please peruse the following guidelines:
Order Confirmation:
Upon completing your order, you will promptly receive an email confirming your order. This email serves as confirmation that we have successfully approved your credit/debit card for the purchase and are in the process of preparing your selected item(s).
Once your order is received, we initiate immediate contact with our warehouse to commence the fulfillment process and prepare your item(s) for shipment.
Order Shipment:
Within 24 hours of your item(s) being dispatched, you will receive an email confirming the shipment. This email will also include the tracking information for your order, providing you with added convenience.
Please note that shipping times may vary due to specific factors, but we want to assure you that we are dedicated to keeping you well-informed throughout the process.
We acknowledge that there may be times when you wish to postpone your delivery to a later date, and we are here to accommodate your needs. Please feel free to reach out to us, and we will make the necessary arrangements. At The Recovery Depot, your convenience and satisfaction are our top priorities.
We get it. You’ve got a lot of choices when it comes to online retailers. Here's why we think you should shop with us at The Recovery Depot.